The Hikvision DS-3E1105P-EI V2 is a 4+1 port managed desktop PoE (Power over Ethernet) switch provides power and data over a single Ethernet cable via 4 x 100 Mbps PoE RJ45 ports and 1 x 100 Mbps network RJ45 uplink port, making it perfect for small-scale IP surveillance networks. It can automatically detect and supply power to any compatible PoE camera allowing you to expand your network without separate power cables, making installation quicker, easier and more cost effective.

Interface

Features:

• 4 × 10/100 Mbps PoE port,1 × 10/100 Mbps RJ45 port
• 6 KV surge protection for PoE ports.
• Total PoE Power Budget 60W
• Support 802.1Q VLAN
• Support PoE watchdog to detect and restart the cameras that do not respond
• Support STP/RSTP Loop prevention
• Support cable detection to locate failure
• Up to 300 m Long Range PoE Transmission
• SPECIFICATIONS

  General
  Shell	Metal material
  Net Weight	0.26 kg (0.573 lb)
  Gross Weight	0.75 kg (1.65 lb)
  Dimensions (W × H × D)	121.1 mm × 27.6 mm × 83.1 mm (4.77” × 1.09” × 3.27”)
  Operating Temperature	0 °C to 40 °C (32 °F to 104 °F)
  Storage Temperature	-40 °C to 85 °C (-40 °F to 185 °F)
  Operating Humidity	5% to 95% (no condensation)
  Relative Humidity	5% to 95% (no condensation)
  Power Supply	54VDC, 1.2A
  Installation Mode	Desk-Mounted Wall-Mounted
  Max. Power Consumption	65 W
  Power Consumption in Idle	0.9 W
  Surge Protection	6 KV
  Network Parameters
  Ports	4 × 10/100 Mbps PoE port, 1 × 10/100 Mbps RJ45 port
  MAC Address Table	2 K
  Switching Capacity	1 Gbps
  Packet Forwarding Rate	0.74 Mpps
  Internal Cache	768 Kbits
  PoE Power Supply
  PoE Standard	IEEE 802.3af,IEEE 802.3at
  PoE Power Pin	End-span: 1/2(-), 3/6(+)
  PoE Port	PoE: Ports 1 to 4
  Max. Port Power	30 W
  PoE Power Budget	60 W
  Software Function
  Long Range	Ports 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  VIP Port	Ports 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
  Port Isolation	Ports 1 to 4: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
  PoE Watchdog	Ports 1 to 4: auto detect and restart the cameras that do not respond.
  Link Aggregation	Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation group(s).
  Loop Prevention	Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP.
  VLAN	VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN.
  HPP	Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
  System Maintenance	Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.
  Approval
  EMC	CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
  Safety	CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
  Chemistry	CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)